Dosing & Mixing

Eductors can be used for accurately dosing and mixing of chemicals or other fluids. By using an eductor you can pump and mix in the same process. This is inherently more efficient and in many cases less expensive than using separate dosing pumps and static mixers.

Dosing Eductor, Mixing, Static Mixer, Dosing Pump, Chemical Eductor, Lined Eductor, PTFE Eductor, Polypropylene Eductor,

  • The eductor can be mounted above, below or alongside the IBC.

  • In most cases the eductor design will be sufficient to ensure the correct suction.

  • Dependent on the application if a very small suction flowrate is required then a valve can be installed to control the suction flow.


  • The pump powers the eductor which draws in the chemical.

  • The eductor discharges to the pump inlet where a secondary mixing occurs. 

  • The pressure differential across the eductor is the same as that across the pump.